BOARD OF DIRECTORS & COMMITTEE CHAIRS
2018–19 PDCA Officers, Directors,
Committee Chairs & Members
The PDCA Board of Directors consists of the Executive Committee and the directors. The Executive Committee includes the
association’s officers, including the president, vice president, secretary, treasurer, immediate past president and executive
director. The directors complete the board and consist of up to an additional nine elected members, including contractors,
associates and technical affiliates. The 2018-19 PDCA Board of Directors is made of the following individuals:
PDCA Officers
President
Larry Moore, GeoStructures, Inc.
Purcellville, Va.
lmoore@geoconstructors.com
Vice President
Scott Callaway, Cajun Deep
Foundations, LLC
Baton Rouge, La.
scottc@cajunusa.com
Treasurer
Bill Marczewski, BSM Engineering
Portland, Ore.
bill@bsmengineering.com
Secretary
Pollyanna Cunningham, ICE®
– International Construction
Equipment, Inc.
Matthews, N.C.
pcunningham@iceusa.com
Immediate Past President
Dave Chapman, Blakeslee, Arpaia,
Chapman
Branford, Conn.
dchapman@bac-inc.com
Executive Director
Steve Hall, PDCA
Orange Park, Fla.
steve@piledrivers.org
PDCA Directors
Doug Keller, Richard Goettle, Inc.
Cincinnati, Ohio
dkeller@goettle.com
Erich Kremer, R. Kremer & Son
Marine Contractors
Brick, N.J.
kremermarine@comcast.net
Scott Webster, GRL Engineers, Inc.
Charlotte, N.C.
swebster@grlengineers.com
Jason Moore, Palmetto Pile
Driving, Inc.
Charleston, S.C.
jason@palmettopiledriving.com
Jay Boyd, Balfour Beatty
Infrastructure, Inc.
Wilmington, N.C.
jboyd@bbiius.com
Karl Higgins, ECS, LLC
Chantilly, Va.
khiggins@ecslimited.com
Rich Anderson, Equipment
Corporation of America
Aldan, Pa.
randerson@ecanet.com
Rob Braden, Skyline Steel, LLC
Springfield, Va.
robert.braden@skylinesteel.com
Kevin Gourgues, Patriot Deep
Foundations
Baton Rouge, La.
keving@patriot-construction.com
PDCA Chapter
Representatives
PDCA of Florida Chapter
Tim Dittmeier, Hammer & Steel
tdittmeier@hammersteel.com
PDCA of South Carolina Chapter
John King, Pile Drivers, Inc.
kingpiledrive@aol.com
PDCA of the Gulf Coast Chapter
Michael Kelly, Gulf South Piling
and Construction
gspmichael@bellsouth.net
PDCA of the Northeast Chapter
Erich Kremer, R. Kremer & Son
Marine Contractors
kremermarine@comcast.net
PDCA of the Pacific Coast
Chapter
Dermot Fallon, Foundation
Constructors, Inc.
dfallon@foundationpile.com
PDCA of the Pacific Northwest
Chapter
Bill Marczewski, BSM Engineering
bill@bsmengineering.com
For information about the
PDCA of the Mid-Atlantic
Chapter and the PDCA of
Texas Chapter, contact the
PDCA office at 904-215-4771.
Associate Member Council
Chair: Diane Fischer, Pile
Dynamics, Inc.
Phone: 216-831-6131
dfischer@pile.com
Co-Chair: James Buttles, Corpac Steel
Phone: 713-261-2262
jbuttles@corpacsteel.com
Members: Chris Ragan (Atlas
Tube), David Maedgen (Gerdau),
Errynne Bell (Skyline Steel),
Fernao de Oliveira Cesar (Gerdau),
J.W. Lodge (Lodge Lumber), Karl
Higgins (ECS, LLC), Marilyn
Poindexter (Atlas Tube), Phil
Wright (L.B. Foster), Pollyanna
Cunningham (ICE®), Rob Likins
(Equipment Corporation of
America), Stephanie Conklin
(R.W. Conklin Steel), Steve
Whitty (Specialty Piling
Systems), Takefumi Takuma
(Giken America), T.C. “Tom”
Heller (Liebherr USA)
Chapters Committee
Chair: Vacant
Members: Andrea Edwards
(Koppers Utility & Industrial
Products), Bill Marczewski (BSM
Engineering), Dermot Fallon
(Foundation Constructors),
Erich Kremer (R. Kremer &
Son Marine Contractors), Greg
Canivan (S&ME), J.J. Waguespack
(Mississippi River Equipment
Co.), Jason Moore (Palmetto
Pile Driving), John King (Pile
Drivers, Inc.), Kevin Gourgues
(Patriot Deep Foundations),
Matt Scerbak (Associated Pile
& Fitting), Michael Kelly (Gulf
South Piling), Rich Anderson
(Equipment Corporation of
America), Sarah Honeyman
(Piling Products), Tim Dittmeier
(Hammer & Steel), Tim Fogarty
(George Harms Construction Co.),
Tom Connor (Consolidated Pipe)
Communications
Committee
Chair: Pollyanna Cunningham, ICE®
Phone: 888-423-8721 ext. 101
pcunningham@iceusa.com
Members: Allen Johnson (ICE®),
Dermot Fallon (Foundation
Constructors), Eric Hendriksen
(DDF), Erich Kremer (R. Kremer
& Son Marine Contractors),
Garland Likins (Pile Dynamics,
Inc.), Jill Harris (Lester
Publications, LLC), John King
(Pile Drivers, Inc.), Karl Higgins
(ECS, LLC), Mike Kelly (Gulf
South Piling and Construction),
Thomas Lane (Koppers Utility
& Industrial Products), Tim
Dittmeier (Hammer & Steel)
Contracts and Risk
Committee
Chair: Alex Filotti, Skanska
Phone: 718-786-6557
alex.filotti@skanska.com
Co-Chair: Rick Kalson, Benesch Law
Phone: 614-223-9380
rkalson@beneschlaw.com
Members: Mike Byrne, Ryan
Maloney (Foley & Lardner LLP),
Sayed M. Sayed, Mark Rice
Education Committee
Chair: Gerry McShane, Service
Steel Warehouse
Phone: 713-210-9323
gmcshane@servicesteel.org
Members: Alex Filotti (Skanska),
Alex Ryberg (GRL Engineers,
Inc.), Bill Marczewski (BSM
Engineering), Dave Chapman
(Blakeslee, Arpaia, Chapman),
Eric Hendriksen (DDF), Garland
Likins (Pile Dynamics, Inc.),
Gerald Verbeek (VMS/Allnamics-
USA), Jim Campbell (PND
Engineers, Inc.), Mike Gregory
(The Hose Company), Mike
Justason (McMaster University),
Mohamad Hussein (GRL
Engineers, Inc.), Pat Hannigan
(Pile Dynamics, Inc.), Richard
Morales (L.B. Foster), T.C.
“Tom” Heller (Liebherr USA)
Staff Liaison:
Debbie Schmidt, PDCA
Phone: 904-215-4771
debbie@piledrivers.org
20 | ISSUE 3 2018
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
link
